ਮੁੱਖ ਸਮੱਗਰੀ 'ਤੇ ਜਾਓ
Redmoon Converters
PA
English en Español es Português (Brasil) pt-BR Français fr Deutsch de Italiano it Nederlands nl 日本語 ja 简体中文 zh-Hans 한국어 ko العربية ar עברית he اردو ur हिन्दी hi मराठी mr తెలుగు te বাংলা bn ਪੰਜਾਬੀ pa
💨 ਵੇਪਿੰਗ ਅਤੇ ਈ-ਲਿਕੁਇਡ

PG/VG ਅਨੁਪਾਤ ਕੈਲਕੁਲੇਟਰ (ਮੈਕਸ VG)

ਆਪਣੇ ਨਿਕੋਟੀਨ ਬੇਸ ਅਤੇ ਫਲੇਵਰ ਕੰਸੰਟਰੇਟਾਂ ਦੀ PG/VG ਸਮੱਗਰੀ ਦੇ ਹਿਸਾਬ ਨਾਲ DIY ਈ-ਲਿਕੁਇਡ ਦਾ ਪ੍ਰਾਪਤ ਹੋਣ ਯੋਗ PG/VG ਅਨੁਪਾਤ ਹੱਲ ਕਰੋ, ਮੈਕਸ-VG ਆਉਟਪੁੱਟ ਸਮੇਤ।

Maximum achievable VG
—
Minimum forced PG: —% (locked in by nic base + flavour)
Source% of batchPG contributionVG contribution
ਗਣਿਤ ਕਿਵੇਂ ਕੰਮ ਕਰਦਾ ਹੈ

Some PG is forced into your mix by ingredients that aren't pure VG: the nicotine base and flavour concentrate. Nic % of batch = target mg/mL ÷ base mg/mL. That fraction carries (base PG %) of PG with it. Same for flavour.

Max VG = 100% − (forced PG from nic + forced PG from flavour + flavour VG already counted). To go higher, switch to a 50/50 or VG-based nic base, lower target nicotine, or reduce flavour %.

ਗਣਿਤ ਕਿਵੇਂ ਕੰਮ ਕਰਦਾ ਹੈ

This tool answers the reverse question: not what to add, but what ratio is even reachable. The nic base occupies target mg/mL divided by base mg/mL of the batch, and flavour occupies its stated percentage; each drags in PG equal to its own PG content. Those two contributions added together give the minimum forced PG, and maximum achievable VG is simply 100% minus that. No batch volume is needed, because everything is expressed as a fraction.

Nic base PG is the lever with the largest effect. At the defaults, a 100 mg/mL base at 100% PG with a 3 mg/mL target and 10% flavour at 100% PG, 13% of the mix is locked as PG and your ceiling is 87% VG. Switch the base to 50% PG and forced PG drops to 11.5%. The Desired VG field changes nothing in the maths; it only drives the feasibility chip underneath the table.

The model is purely volumetric and takes your concentrates at their stated PG percentage, yet many flavourings are partly ethanol, water or triacetin, which behave like neither PG nor VG. It also assumes the nicotine base is entirely PG and VG apart from a negligible amount of nicotine itself. Nothing here accounts for steeping, mixing contraction, or the practical difficulty of pipetting the very small volumes that high-VG recipes demand.

ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ

What is the highest VG I can reach with a 100 mg/mL PG base?

At a 3 mg/mL target with 10% flavour, 87%. The base contributes 3% PG and the flavour another 10%. Drop flavour to 5% and the ceiling rises to 92%; raise the nicotine target and it falls again.

How do I make a genuine max-VG juice?

Use a VG-based or 50/50 nicotine base, keep the target strength low, and pick concentrates that are not 100% PG. Set Nic base PG to 0 with 10% PG-based flavour and the ceiling becomes 90% VG rather than 87%.

Why does my juice come out thinner than the ratio I asked for?

Forced PG from the base and flavour is easy to overlook. The PG contribution column shows exactly how many percentage points each source adds, so you can see where the unexpected extra PG in your finished bottle came from.

Does the Desired VG field change the result?

No. Maximum achievable VG is derived from base strength, base PG, target nicotine and flavour alone. Your desired figure is only compared against that result, to report whether it is achievable and by what margin, or how far over the limit it sits.

Is high nicotine the reason I cannot hit a high VG ratio?

Partly. The nic base occupies target divided by base strength of the batch, so 12 mg/mL drawn from a 100 mg/mL PG base takes 12% of the volume as PG on its own. At 3 mg/mL it takes only 3%.

ਇਸ ਨਾਂ ਨਾਲ ਵੀ ਜਾਣਿਆ ਜਾਂਦਾ ਹੈ

pg vg calculatormax vg calculatorvape ratio calculator

ਸੰਬੰਧਿਤ ਟੂਲ